CALL: 306.700.4759

Resembling a large screw, screw piles are installed deep into the ground, beneath the ground freezing level, to solidly support the structure of your project. This is an advantageous alternative to form tubes and is less expensive than concrete foundations. Opt for a simple and rapid installation, without excavating.

- No damage to landscape or structures

- Perfectly levelled structure

- No delays between the end of the installation and the beginning of works

- Ideal for restricted spaces

- Possible no matter the season

- Removable and reusable system

- Used as underpinning to reinforce existing structures that need additional support because of shifting foundations or increased loads due to additions or renovations

- Easy & Instant foundation solution

- Quick Installation, Custom Designs, Remote Access Capabilities

- No concrete curing times… instant LOAD ready

- Cost Effective

- Increasingly becoming an Engineer’s choice over concrete piles, as Screw piles are stronger, more economical and more durable.

- Site Specific Plans – Each job is engineered Stamped & Sealed

- Industial use… Gas Plants, Tanks, Oilfield Piping Racks, Seperator Skids, Pump Jacks, Work Camps, Factories, Wind Turbines & Communication Towers, Bridges, Signage, Highway Bollards and ect.

- Commercial uses… Foundation Repair, Retail Outlets and Warehouses

- Residential… Houses, RTM’s, Modular Homes, Foundation Repairs, Fences & Decks

- Recreational… Docks, Boat Houses, Sidewalks & Parks

Our Piles can virtually be used in ANY soil condition. We have the foundation solution for any type of Installation.

- Industrial use… Gas Plants, Tanks, Oilfield Piping Racks, Seperator Skids, Pump Jacks, Work Camps, Factories, Wind Turbines & Communication Towers, Bridges, Signage, Highway Bollards and ect.

- Commercial uses… Foundation Repair, Retail Outlets and Warehouses

- Residential… Houses, RTM’s, Modular Homes, Foundation Repairs, Fences & Decks

- Recreational… Docks, Boat Houses, Sidewalks & Parks

Screw piles are a type of deep foundation that can be installed quickly with minimal noise and vibration. Screw piles are wound into the ground, much like a screw is wound into wood. ... Screw piles cut into the soil following a constant pitch, as opposed to auguring through it.

Though Helical Piles are galvanized to prevent rusting, the varying soil conditions can affect the life expectancy. It is the general estimation that piles last over 150 years in normal soil conditions. If a Geotechnical Report is given our engineer’s will calculate the life expectancy.

Fights frost and thawing soil movements on all fronts: inside-out

Piles designed to last. Guaranteed.

1) The inside of GoliathTech piles is filled with polyurethane to prevent ice accumulation inside the pile. (Piles with a diameter over 6 5/8" do not contain polyurethane.)

2) The 60Ksi steel piles are fully galvanized to protect the tubes as well as the heads and helixes against physical deterioration. (Piles 4 1/2" and larger use 55Ksi steel.)

GoliathTech pile heads are equipped with a nut-fastening system. This exclusive anchoring solution allows the structure to be installed directly on the piles, thereby preventing lateral or vertical movement.

- Zero movement

- Superior resistance to wrenching

Piles with reinforced joints.

The GoliathConnect joint system allows a pile to be extended by joining two tubes using a locking bolt. Contrary to the competition’s solution, this innovation strengthens long piles and eliminates risk of movement.

GoliathTech offers a vast array of tubes and helices according to the weight to be supported and the type of soil. Each GoliathTech product is thus perfectly suited to your project. Simply send us in the Drawings for your project and our Engineer’s will calculate the Load, Tension, Lateral, and Combination to determine the exact pile is needed for your project. Each project is designed per the National Building Code and CCMC Regulations. You will receive a Stamped & Seal Engineered Drawing along with a Stamped & Sealed Conformity Report after installation to ensure you get for what you pay for… no exemptions!

We offer turn key solutions for ANY project… Does your project require custom made piles? GoliathTech offers turnkey solutions to meet your needs for any project.

Many contractors assume that helical piles are too expensive. The costs can vary regionally and with the size and depth of the pile, but our typical residential helical pile costs $250 to $300 installed. This includes 60Ksi Galvanized Pile, Installation, Engineering & Stamped Drawing w/ Conformity Report, and a Galvanized Bracket to connect the pile to the structure.

1. Our piles can be used virtually in any soil condition (View Video);

2. Galvanized 60Ksi Steel – Protects tube, Helix, and Head from deterioration;

3. Tubes are filled with Polyurethane to prevent ice accumulation inside the pile;

4. Exclusive & Patent Anchoring Solution – Prevents lateral, vertical & lift movements;

5. Goliath Connect™ - Allows to lengthen the pile without compromising its Strength & Stability;

6. We Engineer & Stamp your file to its appropriate application to ensure all codes are met;

7. All Piles are calculated to meet the requirements of the structure per CCMC & conform to ALL Building/Gov't Codes (View CCMC#13675-R from National Research Council Canada);

8. Project owner is safe against the building code risks (Structural, Insurance, Financial Burden or Re-Sale/Inspection) of improper installation and piles - Effective November 2018 the CCMC Regulations was introduced as a mandate to the building code;

9. Pro-Certified Installers – Over 15 years field experience – 100% Service Satisfaction – Friendly Service.

10. Feel safe & secure that your project is being backed by an Industry Leading ISO Certified Company in Canada & USA ensuring your project is done right, including; Specification of Projects, Engineering, Installation, and Compliance of all Installations.